Please visit our home site at www.TRILOBOATS.com.

Anke and I are building our next boat, and writing about it at ABargeInTheMaking.blogspot.com. Access to the net comes and goes, so I'll be writing in fits and spurts.

Please feel free to browse the archives, leave comments where you will and write, and I'll respond as I can.

Fair winds!

Dave and Anke
triloboats swirl gmail daughter com

Sunday, September 25, 2016

THE COMPLETE SAILOR: A Review

Splash page from The Complete Sailor, 1st Edition
Joshua Slocum on SPRAY by Mark Whitcombe


Long before a wheel rolled, some shaggy fellow straddled a log or sat on a raft and held up something to catch the wind.
-- From The Complete Sailor


The Complete Sailor: Learning the Art of Sailing 
By David Seidman
Art by Kelly Mulford, Mark Whitcombe (1st Edition) and Jan Adkins (2nd Edition)
Review by Dave Zeiger

I'm a modular kind of a guy. 

I like to have things broken down into bite-size, manageable pieces that can be combined and compounded every which way, adapted to whatever situation presents itself. It's the way I think.

So does David Seidman.

The Complete Sailor presents sailing knowledge and skills ranging from essential basics through solid intermediate level, and touches on more advanced topics. 

Wind and water, sailing and anchoring and docking, marlinespike skills, charts and navigation... it's a long list of things to know. Each topic is covered in an easily digested page or two.

Seidman's prose is at once spare and flowing, covering the ground with a sure and easy stride. Mulford's illustrations are as evocative as they are informative. Together, they speak volumes in simple terms. Simple though it be, each time I open these pages I learn something new. Connect new dots and deepen my understanding.

This is one of the two friendliest how-to books on sailing I know (Jan Adkins' The Craft of Sail is a similar but less ambitious introduction, and now he's on board for the second edition). If you - like me - struggle through the dense and endless prose of such tomes as (the admittedly encyclopedic) Chapman's Piloting & Seamanship, you'll appreciate the lighter touch.

Another point I appreciate immensely is that examples are drawn from across a wide spectrum of vessels and their rigs. Not only the latest extrusions, but traditional and even funky boats are well represented. From balsa rafts to clipper ships. From Jeanneaus to JESTER. One can almost smell the pine tar!

This isn't a book written solely for trendsetters, but also - even primarily - for those of us going to sea by the means at hand.

So many books on sailing somehow manage to lose sight of the romance - the dream - of sail. Reading them, it's easy to imagine that seamanship is little more than another exercise in consumerism. That, with informed purchases and proper use of appliances, the world is your Disney. Or the other hand, perhaps worse, that the learning curve before us is so steep and long that one is discouraged to begin.

Dreams are delicate things. They often don't survive the necessary, accumulation of nuts and bolts and know-how that empower them. They get lost in data, overwhelmed by 'practicality', bogged down in tedium, abandoned in despair.

This book pilots us safely. In its care, we circumvent shoals of ennui and reefs of detail, enticed ever forward, eyes lifted at every league to the horizon...

The Complete Sailor is a gift to all of us who dream of water.




*****




PS. The first edition features gorgeous chapter headers (such as that leading this post) by the late Mark Whitcombe. In the second edition, his artwork has been replaced by the work of Jan Adkins. 

While I'm a big fan of Jan's, I miss Mark's touch. The extra materials - GPS, Racing and Trailering - aren't on my need-to-know list. For these reasons, I favor the first edition. 

But both are excellent.







PSS. If nothing else, keeping a copy on board for guests is something I highly recommend. Sitting down with this book between us beats the oakum out of my own, unaccompanied words and doodles.



PSSS. I just found out that Kelly Mulford passed away in 2011. You can read his cousin's memorial post, here.



Friday, September 16, 2016

TriloBoat Styles: Fitting Form to Function



Real style is never right or wrong. It's a matter of being yourself on purpose.
-- G. Bruce Boyer

If you obey all the rules, you miss all the fun.
-- Katherine Hepburn


TriloBoat Styles: Fitting Form to Function

As kids, my brother and I got a lot of mileage out of empty cardboard boxes.

Anything from apple to refrigerator boxes got taken to the moon (space ships), to the bottom of the sea (submarines), across the Great Plains (conestoga wagons), over Niagra Falls (barrels rolling down the hill in our yard). We cut windows and gunports and portcullises into them as 'need' arose.

Something must'a stuck...

*****

I recently worked up StudyPLANS for a T20 side profile (MATCHBOX). By matching beam, super-structure, interior and gear to intended use, a builder can go in most any direction.

The above graphic, showing some approaches I favor for such a small vessel,  represents a pretty fair cross-section of the TriloBoat bestiary, to date.

Box barge hulls are exceptionally versatile foundations for tailoring to any nautical purpose. They carry loads well on stable footing, have lots of working deck and interior volume. Parallel sides ease construction (especially over the mid-ships deadflat) and make the most of their ends (think wide bunks, foredecks and cockpits).

All this, and relatively fast and inexpensive to build!

The approaches shown are just the tip of an iceberg of imagination, possibility and compromise. Innovate; copy; modify; shake 'em up; put 'em in a blender!

What might you do, given an empty box?


*****

A few that got left out:

SCUTTLEFISH
(BIRDWATCHER style)

CARGO

SHANTY

Idea for a container boat...
They dont HAVE to be boxy!




Tuesday, September 6, 2016

A Square Jig for Square Boats

Holes range from 1/4in to 1/2in
May add 7/8in and 3/4in, someday


We meet upon the level, and part upon the square.
 -- Masonic Proverb
 
A Square Jig for Square Boats

Can't say I'm a jig kindofa guy.

When building TRILOBYTE on the fly, a friend stopped by to see how we were doing. He's an ex-shopteacher/current bowyer... standards are high. 

The task at hand was drilling the side windows for screws all around their perimeters.

Our usual approach is divide-and-conquer. This case was an eight foot stretch and we wanted fasteners every six inches or so. Open spaces are divided by twos or threes as seems right by eye. If we're feeling persnickety, we might measure and mark it, using a chip of wood to inset it. But we don't often.

Eight, four, two, one, half-a-foot. Shazaam.

This was a little too quick and dirty for our friend. He gave us a passionate speech on the virtues of precise patterns - how it was the mark of a professional. That it went quickly and looked its best.

We hemmed. We hawed. To show us how easy and efficient it all is, he volunteered to make us a jig.

He did, too. A nice li'l number that worked like a charm. A rabbeted slide with guide holes precisely placed. A thing of beauty, form and efficiency.

Problem is, by the time it was done - a matter of a half hour or so - we'd already drilled AND mounted all the windows.

Looked fine, too. Even he admitted it.

*****

One more story...

When computer generated music first came out, it sounded flat. Robotic. Lifeless.

Why? The algorithms were perfect! Every note was precisely on pitch. Sounded for exactly the duration specified. Attack, reverb and fade were mathematically true to the nth decimal place.

Sucked.

Turns out, the human ear doesn't care for too much perfection. Finds it sterile and uninteresting. Got no soul. Turns out, introducing small errors of pitch, tone and timing brought it alive to us. Turns out, we prefer our imperfect, gritty, wonderful world with all its flaws. We insist on them.

I'm sure there's a lesson in there, somewhere.

*****

So I'm not a jig guy.

But one thing that does come in handy in a square boat is a hole bored square to a surface. Not only handy, but if it's not square, often enough it's gotta be plugged and drilled again. Otherwise a fastner might not pass through its hole in a metal plate. Or a fastner head, washer or nut won't sit flat and water intrudes. Or the durn thing comes out the side.

A square jig for a square boat helps us along.

Next time you're near a drill press, I recommend this:

Start with  a nice, rectangular chunk of stock - hardwood or aluminum work easily and hold up.

Inset a line of squared off holes of standard sizes along edges - just enough room for your drills when pressed against a wall.

To use, align a face of the jig with the reference face to which your hole will be square or parallel. Run your drill through, or at least far enough to continue square without the jig.

Unless the jig is clamped (seldom necessary), I find it helps to withdraw the jig with the bit, rather than the bit alone. If you get off line withdrawing a running power drill while still in the jig, it can get jumpy.

It helps if the jig is big enough to clamp a bit of stock to faces as a guide if a necessary to reach a reference face. For example, when drilling bolts for the handrails (whose upper face had been rounded) we used their sides as reference and drilled parallel to that face and square to the run of the upper face.

This jig - with some extra long bits - has given us quick and easy square holes, every time we've needed it.

Guess it's alright.


Anke drilling with our first, 1/4in jig
Note board clamped to side as guide along handrail sides
for square, plumb and level