Please visit our home site at www.TRILOBOATS.com.

Anke and I are building our next boat, and writing about it at ABargeInTheMaking.blogspot.com. Access to the net comes and goes, so I'll be writing in fits and spurts.

Please feel free to browse the archives, leave comments where you will and write, and I'll respond as I can.

Fair winds!

Dave and Anke
triloboats swirl gmail daughter com

Friday, January 20, 2017

Riglets: A Look at Promising MicroCruiser Rigs

Sven Yrvind showin' us how it's done!

Set a little sail to catch a little  wind,
Lift the hull and give it wings,
To roll us 'round the bend.


Riglets: A Quick Look at Promising MicroCruiser Rigs

In my book, a sailing MicroCruiser is much more than a DaySailor.

It's got to be able to stand up to some shit. It should provide shelter from the elements and sleep its crew aboard. It should carry supplies for a cruise. Human auxiliary propulsion.

So its rig must be handy.

Handy to set and strike. Handy to handle. Handy to hand (reef). DIY.

Dropping the mast to the deck reduces windage for rowing... free-standing is a plus. Easy handling, especially 'hands-off' from the cockpit via lines, makes for easy, trouble-free sailing, Easy reefing means we can de-power quickly when ambushed by the wind. DIY 'cuz we're cheap.

'Course, we might be tempted to give a little, one way or the other...

Many traditional western rigs - sprit, lug, gaff, sprit boomed leg o' mutton among others - get lots of coverage. But they present challenges for the microcruiser, as well. To address them, a number of lesser known rigs have been tried. While they, too, need careful implementation and adaptation, each offers a 'new' approach to practical sail.

In what follows, I'll give a very brief description with a pic... the headers and high-lit text are links to further information.

So let's go take a look at some contendahs!

*****
Perry Phillip's BOBBER
Junk Rig

Fully battened, standing lug rig with lazy jacks, sheeted along leech. Hands off, easy reefing. Ingenuity required  for easy set up and take down. Countless variations. I sing its praises here.

*****

Batwing

A fully battened sail luff-mounted on a short mast and sliding gunter. Similar to Junk rig in shape, it can be adapted for JR's easy reefing.

This rig was used by Frederick Fenger on his YAKABOO, canoe sailing the Caribbean in the early 1900s.

 *****

Shown about half-reef

Layden Lug

Standing lug rig, roller-furled on the boom. Hands off (though gotta be deft with halyard, sheet and furling line). Boom is easily dismounted and lowered to deck. VERY well proven small boat rig!

More info at microcruising.com.

*****
This is a taller version than likely for our needs

Ljungstrom Rig

Twin, flat-cut, triangular sails, fixed along the mast. Open wing and wing with two sheets, or sail into the wind doubled and sheeted as one. Roller reef by rotating the mast.


The BSD Twins are an interesting variant for smaller craft.

*****

Shown about half reef

Holopuni Quick Rig

A single sail, boomed variant of Ljungstrom Rig. I think it's well worth a look!

 *****
May be from one of Daniel Spurr's great books
 Mast Aft Rig

 Mast stepped well aft, flying large single or double staysail (also called Staysail or Delta Rig). Roller furling on stay.

Aft placement is handy to the cockpit. Roller furled staysail provides clear air for the leading edge and upward lift. Lies well to anchor. Must be strongly tensioned for windward efficiency. I'd lean the mast aft with amsteel stays set running.

*****
Wharram TIKI 21
Jib optional
  Wharram Wingsail

A short spar gaff sail with an 'envelope' around mast and halyards, reducing turbulence. Can be used with or without a boom.

*****

T-Modified Crab Claw Rig

Crab Claw Sail set on a short mast with a swiveling yard. Rotates around three axies (vs the normal one)! Very versatile, and possibly a good-to-great rig.

Unfortunately, demands a lot from the crew. Only for the adventurous.

*****
 
Transition Rig

Rig based on a bird's wing! Stretch fabric and bone joints allow 'reefing' by extension and flexion. Folds down as a wing folds in. Really. Check it out! Not as low-tech as some, but...

I wouldn't say this one is ready for our needs. But definitely one to watch!

*****

So there's a quick tour of some rigs a little off the beaten path.

Hotbeds of innovation include DuckworksMagazine.com, PDRacer.com, Yrvind.com, IndigenousBoats.blogspot.com and Hallman.org.

There's a whole world of sailing out there...

Fair winds!

4 comments:

  1. What makes the modified crab claw such a challenge for the crew? I'm a sailer want-to-be looking to add a small sail to my canoe as a cheap way of learning. The modified crab claw would seem to be my first pick As it would allow the sail to be kept low and when tacking would rollover head instead of my needing to duck so low under it. Of course I'm asking because I have no experience which means that I have no idea what I'm missing with that train of thought.

    ReplyDelete
    Replies
    1. Hi,

      The main problem for me was that, since it rotates around 3 (vs usual 1) axies, all the factors that seem simple with one change by a factor of about eight (2^3)! I'm sure that after plenty of exposure/experience, it's a way cool, handy, versatile rig.

      In terms of a canoe or kayak, the very small area would help tame it. The remaining problem would be complexity... 4 spars (mast, yard, 2xlimbs) and 3 controls (downhaul, 2x sheet/limb downhauls).

      For your purposes, Ljungstrom Rig is much simpler. We used it on a skiff. Check out a full fan Batwing in George Dyson's BAIDARKA, too.

      For a full report on our CC, see triloboats.blogspot.com/2013/06/crabclaw-rig-t-modification.html.

      Hope this helps!

      Dave Z

      Delete
    2. Rereading, I see I petered out on that axies paragraph...

      Consider the Center of Effort (CE) of the sail. Normally, one sheets in or out, and the CE moves in or out, affecting mostly weather helm (out cranks the boat into the wind more than in).

      Now we can rotate the sail toward horizontal in profile (side) view, too. The CE now moves aft as we lay it down. This affects weather helm, as well in ADDITION to the first change.

      Now we roll the sail toward flat, directing force upward. The CE is now reacting to all three components.

      In gusty conditions, this gets to be a complicated calculation, fast. It can be downright paralyzing to try to analyze the balance of all these possibilities on the fly, with adrenaline surging.

      I feel that we got a beginner's handle on it in the two months we played with it. Being able to risk dumping in warm water would definitely help.

      It's a rush, but steep learning curve!

      Dave Z

      Delete
  2. Thanks Dave, I see what you mean about the 3rd dimension mobility complicates a quick correction. Especially as I'm getting a feel for sailing.

    ReplyDelete